Feasibility of Invasive Brown Seaweed Rugulopteryx okamurae as Source of Alginate: Characterization of Products and Evaluation of Derived Gels.

Rugulopteryx okamurae (RO) is an invasive brown seaweed that causes severe environmental problems in the Mediterranean Sea. This work proposed an extraction method that enables their use as a raw material for producing sodium alginate. Alginate was successfully extracted from this invasive seaweed, with its gelling performance in the presence of Ca2+ ions comparable to existing commercial alginates. The mannuronic acid (M)-to-guluronic (G) acid ratio in the 1H-NMR profile indicated a higher percentage of G in the RO-extracted alginate, which implies a greater formation of so-called egg box structures. These differences resulted in their different rheological behaviour, as sodium alginate aqueous solutions exhibited a greater viscosity (η at 1 s-1 = 3.8 ± 0.052 Pa·s) than commercial alginate (2.8 ± 0.024 Pa·s), which is related to the egg box structure developed. When gelled in the presence of calcium, an increase in the value of the elastic modulus was observed. However, the value of the tan δ for the extracted alginate was lower than that of commercial alginate gels, confirming a structure more densely packed, which implies a different restructuring of the alginate chain when gelling. These results confirm the suitability of using invasive Rugulopteryx okamurae as a source of calcium alginate gels. In this way, sustainable bio-based materials may be produced from undesired biomass that currently poses a threat to the ecosystem.

Exploring the Anti-Cancer Potential of Hispidin: A Comprehensive in Silico and in Vitro Study on Human Osteosarcoma Saos2 Cells.

Hispidin was initially discovered in basidiomycete Inonotus hispidus (Bull.) P. Karst and this extraordinary compound possesses immense potency and can be extracted from the wild mushroom through specialized bioreactor cultivation techniques. In our study, we isolated it from Inonotus hispidus (Bull.) P. Karst., with a yield of 3.6 %. We identified and characterized hispidin through the implementation of spectroscopic techniques such as FTIR, NMR, and MS. Additionally, we utilized Thermogravimetric Analysis for thermal characterization of the compound. Computational studies based on DFT were performed to investigate the molecular structure, electronic properties, and chemical reactivity of hispidin. PASS analysis for hispidin demonstrated that 19 of them are anti-neoplastic activities. The Pharmacology prediction of hispidin confirm that it is not toxic, non-carcinogenesis with a good human intestinal absorption. The effect of hispidin on the viability of bone cancer cells was evaluated by MTT assay. The results showed that hispidin significantly reduced SaoS2 cell viability in a dose-dependent manner. Molecular docking was carried out using five targets related to bone cancer to determine the interactions between hispidin and the studied proteins. The results demonstrate that hispidin is a good inhibitor for the five targets. Dynamic simulation shows a good stability of the complex hispidin-protein.

Is Silver Addition to Scaffolds Based on Polycaprolactone Blended with Calcium Phosphates Able to Inhibit Candida albicans and Candida auris Adhesion and Biofilm Formation?

Candida spp. periprosthetic joint infections are rare but difficult-to-treat events, with a slow onset, unspecific symptoms or signs, and a significant relapse risk. Treatment with antifungals meets with little success, whereas prosthesis removal improves the outcome. In fact, Candida spp. adhere to orthopedic devices and grow forming biofilms that contribute to the persistence of this infection and relapse, and there is insufficient evidence that the use of antifungals has additional benefits for anti-biofilm activity. To date, studies on the direct antifungal activity of silver against Candida spp. are still scanty. Additionally, polycaprolactone (PCL), either pure or blended with calcium phosphate, could be a good candidate for the design of 3D scaffolds as engineered bone graft substitutes. Thus, the present research aimed to assess the antifungal and anti-biofilm activity of PCL-based constructs by the addition of antimicrobials, for instance, silver, against C. albicans and C. auris. The appearance of an inhibition halo around silver-functionalized PCL scaffolds for both C. albicans and C. auris was revealed, and a significant decrease in both adherent and planktonic yeasts further demonstrated the release of Ag+ from the 3D constructs. Due to the combined antifungal, osteoproliferative, and biodegradable properties, PCL-based 3D scaffolds enriched with silver showed good potential for bone tissue engineering and offer a promising strategy as an ideal anti-adhesive and anti-biofilm tool for the reduction in prosthetic joints of infections caused by Candida spp. by using antimicrobial molecule-targeted delivery.

In vitro cytotoxicity of magnetic-fluorescent bioactive glasses on SaOS-2, MC3T3-E1, BJ fibroblast cells, their hemolytic activity, and sorafenib release behavior.

In the study, the fabrication of superparamagnetic-fluorescent bioactive glasses in the form of the particle, nanofiber, and 3D scaffolds was performed by including maghemite (γ-Fe2O3) nanoparticles and photoluminescent rare earth element ions (Eu3+, Gd3+, and Yb3+) using sol-gel, electrospinning, and robocasting techniques, respectively. The in vitro cytotoxicity of the magnetic-fluorescent bioactive glasses on osteosarcoma SaOS-2, pre-osteoblast MC3T3-E1, and BJ fibroblast cells, as well as their hemolytic activity and sorafenib tosylate loading and release behavior, were investigated. The cytotoxicity of the bioactive glass samples was tested using the MTT assay. Additionally, the alkaline phosphatase activity of the studied glasses was examined as a function of time. The mineralization behavior of the pre-osteoblast cell-seeded glass samples was analyzed using Alizarin red S staining. Results revealed that the in vitro cytotoxicity of the studied bioactive glasses in the form of particles and nanofibers depended on the sample concentration, whereas in the case of the 3D scaffolds, no cytotoxic response was observed on the osteosarcoma, pre-osteoblast, and fibroblast cells. Similarly, particle and nanofiber-based glass samples induced dose-dependent hemolysis on red blood cells. Drug loading rates were much lower for the 3D scaffolds compared to the particle and nanofiber-based samples. Drug release rates ranged from 25 % to 90 %, depending on the bioactive glass morphology and the pH of the release medium. It was concluded that the studied bioactive glasses have the potential to be used in tissue engineering applications and cancer therapy.

Decoupling the Effects of Collagen Alignment and Bioceramic Incorporation on Osteoblast Proliferation, Differentiation, and Mineralization.

Biomimetic scaffolds provide the essential biophysical (e.g., surface topography, stiffness) and biochemical cues (e.g., composition) to guide cell morphology, proliferation, and differentiation. Although the effects of biomaterial-directed cues on cell response have been widely reported, few studies have sought to decouple these effects to better understand the interplay between the different physicochemical factors on tissue-specific cell function. Herein, beta-tricalcium phosphate (ß-TCP) was incorporated into electrochemically aligned collagen (ELAC) and random collagen threads, and the individual and interactive effects of collagen alignment (i.e., biophysical) and bioceramic incorporation (i.e., biochemical) on osteoblast cell morphology, proliferation, differentiation, and mineralization were investigated. Results showed that collagen alignment in ELAC threads was retained upon ß-TCP incorporation. Collagen alignment significantly improved (p < 0.05) the swelling capacity and stability of collagen threads, while ß-TCP incorporation showed no such effects. Tensile tests revealed that ß-TCP incorporation significantly decreased (p < 0.05) the strength and stiffness of ELAC threads. Significant increase (p < 0.05) in Saos-2 cell orientation and alkaline phosphatase (ALP) activity was observed on ELAC compared to random collagen threads indicating that aligned collagen serves as a key driving factor for osteogenesis. ß-TCP incorporation into random collagen threads had no effect on Saos-2 cell function. On the other hand, presence of ß-TCP significantly augmented (p < 0.05) Saos-2 cell metabolic activity, differentiation, and mineralization on ELAC threads. Together, these findings suggest that combining collagen alignment and ß-TCP incorporation can create robust tissue-mimicking scaffolds for bone regeneration applications.

Effects of Daidzein, Tempeh, and a Probiotic Digested in an Artificial Gastrointestinal Tract on Calcium Deposition in Human Osteoblast-like Saos-2 Cells.

Adequate calcium intake is crucial for the prevention and treatment of bone-related issues. Developing a nutritional source of readily bioavailable calcium is particularly significant for individuals deficient in this essential element and at risk of developing osteoporosis. This research aimed to evaluate the impact of tempeh (T), daidzein (D), and Lactobacillus acidophilus (LA) within a simulated intestinal environment consisting of Caco-2 epithelial and Saos-2 cells, focusing on their implications for bone mineralization mechanisms. In the initial phase, calcium bioaccessibility from calcium citrate (CaCt), LA, D, the daidzein combination D-CaCt-LA (D1:1:1), and the tempeh combination T-CaCt-LA (T1:1:1) was assessed through digestion simulation. The calcium content of both untreated and digested samples was determined using atomic absorption spectrometry (AAS). In the subsequent stage, the digested samples were used to induce intestinal absorption in differentiated enterocyte-like Caco-2 cells. The permeable fractions were then evaluated in a culture of osteoblast-like Saos-2 cells. Preliminary cellular experiments employed the MTT assay to assess cytotoxicity. The results indicated that the analyzed products did not influence the deposition of extracellular calcium in Saos-2 cells cultured without mineralization stimulators. The combined formulations of permeable fractions of digested CaCt, LA, D, and T demonstrated the capacity to enhance the proliferation of Saos-2 cells. In Saos-2 cells, D, D1:1:1, and LA showed no discernible impact on intracellular calcium accumulation, whereas T and T1:1:1 reduced the calcium deposits. Additionally, mRNA transcripts and alkaline phosphatase (ALP) activity levels in Saos-2 cells cultured without mineralization induction were unaffected by the analyzed products. An examination of the products revealed no discernible effect on ALP activity or mRNA expression during Saos-2 cell differentiation. Our findings suggest that tempeh, daidzein, and L. acidophilus did not positively impact cellular calcium deposition in Saos-2 cells. However, tempeh, daidzein and its combination, and L. acidophilus might enhance the process of osteogenic differentiation in Saos-2 cells. Nevertheless, this study did not identify any synergistic impact on calcium deposition and the process of osteogenic differentiation in Saos-2 cells of isoflavones and probiotics.

Combination Treatment with Liposomal Doxorubicin and Inductive Moderate Hyperthermia for Sarcoma Saos-2 Cells.

Despite efforts in osteosarcoma (OS) research, the role of inductive moderate hyperthermia (IMH) in delivering and enhancing the antitumor effect of liposomal doxorubicin formulations (LDOX) remains unresolved. This study investigated the effect of a combination treatment with LDOX and IMH on Saos-2 human OS cells. We compared cell viability using a trypan blue assay, apoptosis and reactive oxygen species (ROS) measured by flow cytometry and pro-apoptotic Bax protein expression examined by immunocytochemistry in response to IMH (42 MHz frequency, 15 W power for 30 min), LDOX (0.4 µg/mL), and LDOX plus IMH. The lower IC50 value of LDOX at 72 h indicated increased accumulation of the drug in the OS cells. LDOX plus IMH resulted in a 61% lower cell viability compared to no treatment. Moreover, IMH potentiated the LDOX action on the Saos-2 cells by promoting ROS production at temperatures of <42 °C. There was a 12% increase in cell populations undergoing early apoptosis with a less heterogeneous distribution of Bax after combination treatment compared to those treated with LDOX (p < 0.05). Therefore, we determined that IMH could enhance LDOX delivery and its antitumor effect via altered membrane permeabilization, ROS generation, and a lower level of visualized Bax heterogeneity in the Saos-2 cells, suggesting the potential translation of these findings into in vivo studies.

Photobiomodulation effects of blue light on osteogenesis are induced by reactive oxygen species.

Blue light-mediated photobiomodulation (PBM) is a promising approach to promote osteogenesis. However, the underlying mechanisms of PBM in osteogenesis are poorly understood. In this study, a human osteosarcoma cell line (i.e., Saos-2 cells) was subjected to intermittent blue light exposure (2500 µM/m2/s, 70 mW/cm2, 4.2 J/cm2, once every 48 h) and the effects on Saos-2 cell viability, metabolic activity, differentiation, and mineralization were investigated. In addition, this study addressed a possible role of blue light induced cellular oxidative stress as a mechanism for enhanced osteoblast differentiation and mineralization. Results showed that Saos-2 cell viability and metabolic activity were maintained upon blue light exposure compared to unilluminated controls, indicating no negative effects. To the contrary, blue light exposure significantly increased (p < 0.05) alkaline phosphatase activity and Saos-2 cell mediated mineralization. High-performance liquid chromatography (HPLC) assay was used for measurement of reactive oxygen species (ROS) activity and showed a significant increase (p < 0.05) in superoxide (O2•-) and hydrogen peroxide (H2O2) formed after blue light exposure. Together, these results suggest that the beneficial effects of blue light-mediated PBM on osteogenesis may be induced by controlled release of ROS.

Evaluation of the Biological Effect of Non-UV-Activated Bergapten on Selected Human Tumor Cells and the Insight into the Molecular Mechanism of Its Action.

There is some evidence that non-photoactivated psoralens may be active against breast and colon tumor cells. Therefore, we evaluated the antiproliferative, proapoptotic, and anti-migrative effect of 5-methoxypsoralen (5-MOP) isolated from Peucedanum tauricum MB fruits in human colorectal adenocarcinoma (HT-29 and SW620), osteosarcoma (Saos-2 and HOS), and multiple myeloma (RPMI8226 and U266). Dose- and cell-line-dependent effects of 5-MOP on viability and proliferation were observed, with the strongest inhibitory effect against Saos-2 and a moderate effect against the HOS, HT-29, and SW620 cells. Multiple myeloma showed low sensitivity. The high viability of human normal cell cultures (HSF and hFOB) in a wide range of 5-MOP concentrations tested (6.25-100 µM) was confirmed. Moreover, the migration of treated Saos-2, SW620, and HT-29 cell lines was impaired, as indicated via a wound healing assay. Flow cytometry analysis conducted on Saos-2 cells revealed the ability of 5-MOP to block the cell cycle in the G2 phase and trigger apoptosis, which was accompanied by a loss of mitochondrial membrane potential, caspases (-9 and -3) activation, the altered expression of the Bax and Bcl-2 proteins, and decreased AKT phosphorylation. This is the first report evaluating the antiproliferative and antimigratory impact of non-UV-activated bergapten on the abovementioned (except for HT-29) tumor cells, which provides new data on the potential role of 5-MOP in inhibiting the growth of various types of therapeutic-resistant cancers.

A critical study of the nonlinear rheological properties in major classes of foods using the Sequence of Physical Processes (SPP) method and the Fourier Transform Coupled with Chebyshev Decomposition (FTC) method.

The nonlinear rheological behaviors of three different classes of foods (emulsion, suspension, and elastic network) were studied and analyzed using the Rogers Sequence of Physical Processes (SPP) method and the Ewoldt-McKinley method of coupling Fourier Transform with Chebyshev Decomposition (FTC). SPP analysis led to instantaneous rheological parameters G't and G″t at any point in time, providing a more accurate picture of the linear viscoelastic region and crossover points by the 3D amplitude sweep. When G't is plotted against G″t, the resulting graph is a deltoid which offers a detailed and distinctive intracycle behavior of each class of food. Analyzing the revolution of deltoids with increasing strain allows for the determination of a critical strain, beyond which irreversible network breakdown occurs. The strain range between the linear viscoelastic limit and the critical strain found in SPP is comparable to the MAOS region as determined with FTC. Under increasing amplitude, predominantly elastic networks showed a gradual structural rearrangement, while more erratic and abrupt changes were observed in the suspension and emulsion we studied. Under increasing frequency, elastic responses dominate viscous responses in all samples due to the shorter experimental time, allowing less relaxation.

Genistein Induces Antiproliferative Activity and Apoptosis in Human Osteosarcoma Saos-2 Cells.

BACKGROUND/AIM: Genistein (4', 5, 7-trihydroxyisoflavone) and daidzein (4', 7-dihydroxyisoflavone) are isoflavones derived from soybean and have anti-cancer effects in various cells. However, the effects of genistein and daidzein on the human osteosarcoma cell line Saos-2 has not been investigated before. MATERIALS AND METHODS: Human osteosarcoma Saos-2 cells were treated with genistein for 24 and 48 hours. Cytotoxicity and apoptosis were measured. RESULTS: Genistein significantly inhibited proliferation of Saos-2 cells stronger than daidzein in a dose-dependent manner (0 to 80 µM). Genistein also significantly suppressed Saos-2 cell viability in a dose-dependent manner (0 to 100 µM). In contrast, daidzein did not affect Saos-2 cell viability. Real-time PCR revealed that genistein caused G1-arrest by increasing the expression of p21 and p27 mRNAs in Saos-2 cells. In addition, genistein induced apoptosis through the up-regulation of effector caspase-3/7 activity in Saos-2 cells. Genistein also enhanced initiator caspase-9 and TNF-α mRNA expression in cells. CONCLUSION: Genistein may inhibit proliferation through the up-regulation of p21 and p27 and viability by inducing apoptosis in Saos-2 cells.

Nelumbo nucifera Leaf Extract Induces Cytotoxicity in Osteosarcoma Saos-2 Cells.

Background Osteosarcoma is the eighth most common cancer and its prevalence in children makes it a global concern. Existing medications and treatments like high-dose methotrexate possess harmful side effects. Therefore, novel herbal drugs like Nelumbo nucifera are of utmost importance. Aim  To analyze a novel anticancer herbal drug, Nelumbo nucifera leaf extract for its cytotoxic potential against osteosarcoma.  Materials and method Nelumbo nucifera leaf extract was prepared. Saos-2 Cells (human osteosarcoma cell line) were treated with Nelumbo nucifera leaf extract (25, 50, 75, 100, 125, and 150 µg/ml) for 24 hours which were then subjected to MTT assay, morphological analysis and DAPI staining. Results The results suggested that Nelumbo nucifera leaf extract had a concentration-dependent cytotoxic effect on Saos-2 cell line. The extract significantly reduced the number of viable cells, inhibited proliferation and induced morphological changes in Saos-2 cells.  Conclusion Nelumbo nucifera has the potential to induce cytotoxicity against osteosarcoma cell lines and hence, this study provides a novel therapeutic regimen for the treatment of osteosarcoma.

Tuning of Silver Content on the Antibacterial and Biological Properties of Poly(ɛ-caprolactone)/Biphasic Calcium Phosphate 3D-Scaffolds for Bone Tissue Engineering.

There is a growing interest in tissue engineering, in which biomaterials play a pivotal role in promoting bone regeneration. Furthermore, smart functionalization can provide biomaterials with the additional role of preventing orthopedic infections. Due to the growing microbial resistance to antimicrobials used to treat those infections, metal ions, such as silver, thanks to their known wide range of bactericidal properties, are believed to be promising additives in developing antibacterial biomaterials. In this work, novel poly(ε-caprolactone) (PCL)-based 3D scaffolds have been designed and developed, where the polymer matrix was modified with both silver (Ag), to supply antibacterial behavior, and calcium phosphates (biphasic calcium phosphate, BCP) particles to impart bioactive/bioresorbable properties. The microstructural analysis showed that constructs were characterized by square-shaped macropores, in line with the morphology and size of the templating salts used as pore formers. Degradation tests demonstrated the important role of calcium phosphates in improving PCL hydrophilicity, leading to a higher degradation degree for BCP/PCL composites compared to the neat polymer after 18 days of soaking. The appearance of an inhibition halo around the silver-functionalized PCL scaffolds for assayed microorganisms and a significant (p < 0.05) decrease in both adherent and planktonic bacteria demonstrate the Ag+ release from the 3D constructs. Furthermore, the PCL scaffolds enriched with the lowest silver percentages did not hamper the viability and proliferation of Saos-2 cells. A synergic combination of antimicrobial, osteoproliferative and biodegradable features provided to 3D scaffolds the required potential for bone tissue engineering, beside anti-microbial properties for reduction in prosthetic joints infections.

Exploring the molecular mechanism of linagliptin in osteosarcoma cell lines for anti-cancer activity.

BACKGROUND: Finding new applications for widely used current drugs is a fast and effective technique for discovering new anticancer chemicals. Osteosarcoma (OS), the most prevalent form of bone cancer, has several side effects that significantly lower patients' quality of life. This study aims to systematically examine the anti-cancer activity of linagliptin (LG) in the osteosarcoma cell line Saos-2. METHODS: MTT assays and flow cytometry were used to assess cell viability and apoptosis, respectively. qPCR array experiments were carried out to determine target gene expressions and explain the molecular mechanism of LG's action. RESULTS: Linagliptin treatment significantly decreased the viability of Saos-2 cells and hFOB1.19 cells (p < 0.001). The treatment also induced increased apoptotic effects in both Saos-2 cells (p < 0.001) and hFOB1.19 cells (p < 0.05). qPCR assays were conducted to assess cancer pathway analysis after applying specific quantities of LG to Saos-2 and hFOB1.19 cells. CONCLUSION: The findings of this study demonstrate that LG inhibits the proliferation of Saos-2 cells and induces cell death. LG supports cell death by suppressing the expression of specific genes involved in cancer pathways.

The role of plasma in the yield stress of blood.

BACKGROUND: Yielding and shear elasticity of blood are merely discussed within the context of hematocrit and erythrocyte aggregation. However, plasma might play a substantial role due its own viscoelasticity. OBJECTIVE: If only erythrocyte aggregation and hematocrit would determine yielding, blood of different species with comparable values would present comparable yield stresses. METHODS: rheometry (SAOS: amplitude and frequency sweep tests; flow curves) of hematocrit-matched samples at 37°C. Brillouin Light Scattering Spectroscopy at 38°C. RESULTS: Yield stress for pig: 20mPa, rat: 18mPa, and human blood: 9mPa. Cow and sheep blood were not in quasi-stationary state supporting the role of erythrocyte aggregation for the development of elasticity and yielding. However, pig and human erythrocytes feature similar aggregability, but yield stress of porcine blood was double. Murine and ruminant erythrocytes both rarely aggregate, but their blood behavior was fundamentally different. Pig plasma was shear-thinning and murine plasma was platelet-enriched, supporting the role of plasma for triggering collective effects and gel-like properties. CONCLUSIONS: Blood behavior near zero shear flow is not based solely on erythrocyte aggregation and hematocrit, but includes the hydrodynamic interaction with plasma. The shear stress required to break down elasticity is not the critical shear stress for dispersing erythrocyte aggregates, but the shear stress required to fracture the entire assembly of blood cells within their intimate embedding.

Single-Molecule Telomere Assay via Optical Mapping (SMTA-OM) Can Potentially Define the ALT Positivity of Cancer.

Telomeres play an essential role in protecting the ends of linear chromosomes and maintaining the integrity of the human genome. One of the key hallmarks of cancers is their replicative immortality. As many as 85-90% of cancers activate the expression of telomerase (TEL+) as the telomere maintenance mechanism (TMM), and 10-15% of cancers utilize the homology-dependent repair (HDR)-based Alternative Lengthening of Telomere (ALT+) pathway. Here, we performed statistical analysis of our previously reported telomere profiling results from Single Molecule Telomere Assay via Optical Mapping (SMTA-OM), which is capable of quantifying individual telomeres from single molecules across all chromosomes. By comparing the telomeric features from SMTA-OM in TEL+ and ALT+ cancer cells, we demonstrated that ALT+ cancer cells display certain unique telomeric profiles, including increased fusions/internal telomere-like sequence (ITS+), fusions/internal telomere-like sequence loss (ITS-), telomere-free ends (TFE), super-long telomeres, and telomere length heterogeneity, compared to TEL+ cancer cells. Therefore, we propose that ALT+ cancer cells can be differentiated from TEL+ cancer cells using the SMTA-OM readouts as biomarkers. In addition, we observed variations in SMTA-OM readouts between different ALT+ cell lines that may potentially be used as biomarkers for discerning subtypes of ALT+ cancer and monitoring the response to cancer therapy.

A new approach to the development and assessment of doxorubicin-loaded nanoliposomes for the treatment of osteosarcoma in 2D and 3D cell culture systems.

Doxorubicin (DOX) is an effective anticancer drug used for the treatment of osteosarcoma. Liposomal nanocarriers for doxorubicin administration are now regarded as one of the most promising approaches to overcome multiple drug resistance and adverse side effects. The use of hydrogel as a 3D scaffold to mimic the cellular environment and provide comparable biological conditions for deeper investigations of cellular processes has attracted considerable attention. This study aimed to evaluate the impact of liposomal doxorubicin on the osteosarcoma cell line in the presence of alginate hydrogel as a three-dimensional scaffold. Different liposomal formulations based on cholesterol, phospholipids, and surfactants containing doxorubicin were developed using the thin-layer hydration approach to improve therapeutic efficacy. The final selected formulation was superficially modified using DSPE-mPEG2000. A three-dimensional hydrogel culture model with appropriate structure and porosity was synthesized using sodium alginate and calcium chloride as crosslinks for hydrogel. Then, the physical properties of liposomal formulations, such as mechanical and porosity, were characterized. The toxicity of the synthesized hydrogel was also assessed. Afterward, the cytotoxicity of nanoliposomes was analyzed on the Saos-2 and HFF cell lines in the presence of a three-dimensional alginate scaffold using the MTT assay. The results indicated that the encapsulation efficiency, the amount of doxorubicin released within 8 h, the mean size of vesicles, and the surface charge were 82.2%, 33.0%, 86.8 nm, and -4.2 mv, respectively. As a result, the hydrogel scaffolds showed sufficient mechanical resistance and suitable porosity. The MTT assay demonstrated that the synthesized scaffold had no cytotoxicity against cells, while nanoliposomal DOX exhibited marked toxicity against the Saos-2 cell line in the 3D culture medium of alginate hydrogel compared to the free drug in the 2D culture medium. Our research showed that the 3D culture model physically resembles the cellular matrix, and nanoliposomal DOX with proper size could easily penetrate into cells and cause higher cytotoxicity compared to the 2D cell culture.

Comparative Study of Ozonated Glycerol and Macrogol Ointment on Bone Matrix Production by Human Osteosarcoma Cell Line Saos-2.

Ozonated glycerol is glycerol containing ozone, has no unpleasant odor, and has a long half-life. To apply ozonated glycerol for clinical use, ozonated macrogol ointment has been developed by adding macrogol ointment to ozonated glycerol to increase the retention in the affected area. However, the effects of ozone on this macrogol ointment were unclear. The viscosity of the ozonated macrogol ointment was approximately two times higher than that of ozonated glycerol. The effect of the ozonated macrogol ointment on the human osteosarcoma cell line Saos-2 (Saos-2 cells) proliferation, type 1 collagen production, and alkaline phosphatase (ALP) activity were studied. The proliferation of Saos-2 cells was assessed using MTT and DNA synthesis assays. Type 1 collagen production and ALP activity were studied using ELISA and ALP assays. Cells were treated for 24 h with or without 0.05, 0.5, or 5 ppm ozonated macrogol ointment. The 0.5 ppm ozonated macrogol ointment significantly elevated Saos-2 cell proliferation, type 1 collagen production, and ALP activity. These results also showed almost the same trend as for ozonated glycerol.

Tailoring the Microarchitectures of 3D Printed Bone-like Scaffolds for Tissue Engineering Applications.

Material extrusion (MEX), commonly referred to as fused deposition modeling (FDM) or fused filament fabrication (FFF), is a versatile and cost-effective technique to fabricate suitable scaffolds for tissue engineering. Driven by a computer-aided design input, specific patterns can be easily collected in an extremely reproducible and repeatable process. Referring to possible skeletal affections, 3D-printed scaffolds can support tissue regeneration of large bone defects with complex geometries, an open major clinical challenge. In this study, polylactic acid scaffolds were printed resembling trabecular bone microarchitecture in order to deal with morphologically biomimetic features to potentially enhance the biological outcome. Three models with different pore sizes (i.e., 500, 600, and 700 µm) were prepared and evaluated by means of micro-computed tomography. The biological assessment was carried out seeding SAOS-2 cells, a bone-like cell model, on the scaffolds, which showed excellent biocompatibility, bioactivity, and osteoinductivity. The model with larger pores, characterized by improved osteoconductive properties and protein adsorption rate, was further investigated as a potential platform for bone-tissue engineering, evaluating the paracrine activity of human mesenchymal stem cells. The reported findings demonstrate that the designed microarchitecture, better mimicking the natural bone extracellular matrix, favors a greater bioactivity and can be thus regarded as an interesting option for bone-tissue engineering.

Pasting and Rheological Properties of Starch Paste/Gels in a Sugar-Acid System.

This study was to investigate the impact of granule size, amylose content, and starch molecular characteristics on pasting and rheological properties of starch paste/gels in neutral (water) and sugar-acid systems. Normal rice starch (RS), waxy rice starch (WRS), normal tapioca starch (TS), and waxy tapioca starch (WTS) representing small-granule starches and intermediate-granule starches respectively, were used in the study. Impacts of granule size, AM content, and their synergistic effects resulted in different starch susceptibility to acid hydrolysis and interactions between starch and sucrose-water, yielding different paste viscosities in both systems. The high molecular weight (Mw¯) and linearity of amylopectin and amylose molecules increased the consistency of starch pastes. RS produced a stronger and more brittle gel than other starch gels in both neutral and sugar-acid systems. The results indicated the impact of the effect of granule size and amylose content on starch gel behaviors. Properties of waxy starch gels were mainly governed by amylopectin molecular characteristics, especially in the sugar-acid system. Adding sugar and acid had minor impacts on starch gel behaviors in the linear viscoelastic (LVE) region but were most evident in the nonlinear response regime of starch gels as shown in the Lissajous curves at large oscillatory strain.